Introduction

Petro-Canada™ Lubricants’ TURBOFLO™ is a premium turbine fluid designed for the lubrication of geared heavy duty gas turbines with common gear and bearing lubrication systems. It’s outstanding thermal and oxidative stability also make it an excellent choice for severe service gas and steam turbine applications.

Features

  • Exceptional resistance to fluid breakdown caused by exposure to air and high temperatures.
  • Excellent air and water separability
  • Superior scuffing and wear protection
  • Robust, highly effective additive system
  • Single Fluid for steam and gas turbines in both geared and non-geared applications

Applications

TURBOFLO Fluids are recommended for the lubrication of the high-speed bearings in stationary Gas turbines. Major utility, pipeline and gas field recovery and co-generation operators have Recognized the performance of TURBOFLO compared to conventional mineral oil turbine fluids. Also TURBOFLO Fluids are recommended for lubricating steam turbines used for electric power generation and other industrial applications.

TURBOFLO EP significantly exceeds the demanding service requirements of gas and steam turbine Operators in power generation, prime mover, and other industrial applications. It is primarily recommended for geared heavy duty gas turbines that require a turbine fluid that provides wear and scuffing protection. It is also recommended for steam and gas turbine systems that do not require an EP fluid if consolidation of lubricants is a key priority.

TURBOFLO XL is a premium product designed to significantly exceed the demanding service requirements of steam and gas turbine operators. It also provides extended, corrosion-free lubrication of bearings operating in ambient temperatures above 260°C or 500°F.

Petro-Canada Lubricants’ TURBOFLO R&O Oils are designed to meet the demanding service requirements of steam and gas turbine applications. They also provide extended, corrosion-free lubrication of bearings and gears in a wide range of industrial machinery.

Petro-Canada’s™ HARNEX™ 320 Wind Turbine Gear Oil is a premium synthetic lubricant designed to Provide exceptional anti-wear/extreme pressure (AW/EP) protection and corrosion control under the toughest conditions. HARNEX 320 is specially formulated for lubricating wind turbine gearboxes for effective operation and long service life.

TURBONYCOIL 600 is recommended for use in land based aero derivative gas turbine engines which Require a lubricant qualified against U.S. Military Specification MIL-PRF-23699G Standard (Non Corrosion Inhibiting) Classification or a Rolls Royce approved lubricant.

Product Line

TURBOFLO 32

TURBOFLO 46

TURBOFLO 68

TURBOFLO EP 32

TURBOFLO EP 46

HARNEX 320

TURBOFLO XL 32

TURBOFLO XL 46

TURBOFLO XL 68

TURBOFLO R&O 10

TURBOFLO R&O 22

TURBOFLO R&O 32

TURBOFLO R&O 46

TURBOFLO R&O 68

TURBOFLO R&O 100

TURBOFLO R&O 150

TURBOFLO R&O 220

TURBOFLO R&O 320

TURBOFLO R&O Premium 77

TURBONYCOIL 600