Introduction
Petro-Canada’s COMPRO Compressor Fluid is a premium quality lubricant specifically designed to provide long and highly reliable service life in industrial air compressor applications.
Features
- Operates at very high and very low temperatures
- Excellent protection against wear
- Protects against rust and corrosion
- Low volatility reduces oil carry-over into the air system
- Operates at very high and very low temperatures
- Will not form varnish or carbon residue on compressor even at very high operating temperatures
- Resists oxidative breakdown better than leading mineral oil based fluids
- Low volatility reduces oil carry-over into the air system
- Improved viscosity index
Applications
COMPRO Synthetic Compressor Fluid is specifically designed for rotary screw air compressors operating in severe applications, including high and low temperature extremes.
COMPRO Compressor Fluid is designed to lubricate and cool all types of rotary screw, reciprocating, centrifugal and lobe compressors. It is available in four ISO viscosity grades: 32, 68, 100 and 150 to cover most compressor applications.
COMPRO XL-R Compressor Fluid is recommended for lubrication and cooling of both single and multi-stage reciprocating air compressors which operate at high discharge temperatures.
While COMPRO XL-S Compressor Fluid may be used to lubricate and cool all types of rotary vane, Reciprocating, centrifugal and lobe air compressors, it is specifically designed to significantly extend service life in rotary screw compressors. It is available in five ISO viscosity grades: 32, 46, 68, 100 and 150 to cover most compressor applications.
Petro-Canada Compressor Oils RP 268 and RP 460 have been specifically developed for the Lubrication of natural gas compressor cylinders and rod packings that have separate force feed Lubrication systems.
SPX 7100 and SPX 7000 are used for flooded screw compressors in natural gas field booster Service in Screw Compressor, also SPX 7000 and SPX 7220 are available for once through rod packing and cylinder lubrication (not crankcase) in reciprocating compressors at high pressures.
NGS 1000 and NGS 1500 were developed for use as a compressor fluid for flooded screw compressors in natural gas service. It is widely used for applications involving harsh environments and high temperatures.
NG Screw CompOil compressor fluids are used for flooded screw compressors in natural gas field Booster service. Although these fluids are primarily intended for dry, light and clean natural Gas service, at moderate temperatures and pressures, they can be used in select applications Where water, H²S and/or CO² contaminate the natural gas streams.
NG CompOil PAO 150 compressor fluid is used for flooded screw compressors in natural gasField booster service. It is widely used for applications involving contaminated hydrocarbonGas streams and elevated temperatures.
NG CompOil AW 150 / 220 compressor fluids can be used to lubricate the frame and cylinders / packings for reciprocating compressors in natural gas field booster service.
SPX 5000 is recommended for Compression of propane in refrigeration service & Compression of sweet, dry natural gas.
PURITY FG Compressor Fluids may be safely used to lubricate and cool rotary screw, rotary vane and reciprocating air compressors as well as vacuum pumps in food plant environments.
REFLO A is formulated to lubricate ammonia refrigeration compressors used in large commercial operations such as cold stores, food processing plants, marine systems and ice arenas. REFLO AIs also used in manufacturing industries that require low temperature control, such as pharmaceuticals and microelectronics.
REFLO SYNTHETIC 68A can be used in ammonia refrigeration systems where evaporator temperatures are greater than -51°C (-60°F).
REFLO XL can be used in ammonia refrigeration systems where evaporator temperatures are as low as -42°C (-44°F) in well maintained systems.
REFLO CFC is formulated to work with CFC (chlorinated fluorocarbon) refrigerants such as R11, R12, R-113, R-114, R-115. It may also be used at moderate temperatures with HCFC (Hydro chlorinated fluorocarbon) refrigerants such as R22, R123, R-124, R-141b, R-142b, R502 As well as Methyl Chloride, Carbon Dioxide (R-744) and Ammonia (R-717). REFLO CFC is recommended for use by major OEM manufacturers of compressors and equipment.