Introduction
Long Drain Automatic Transmission Fluids are specially formulated to perform under the demanding severe service operating conditions found in transmission systems.
Features
- Extended fluid life
- Enhanced product performance for newer and older transmissions
- More consistent shifting performance
- Improved fuel economy
- Outstanding anti-shudder durability and stable friction properties
- Excellent resistance to oxidative and thermal breakdown
Applications
Petro-Canada DEXRON -VI ATF is recommended for all 2006 and beyond GM vehicles with automatic transmissions calling for the GMW16444 specification. It is designed to be fully back serviceable for DEXRON -III (H), III(G) and II(E),DEXRON -VI ATF -VI is suitable for use where Volvo specification 97342 is mandated. It is also suitable for use where Chrysler/Dodge/Jeep vehicles specify Part Number 68043742AA. Note that most Chrysler automatic transmissions call for ATF+4 DEXRON-VI also for Voith Transmission approved for the 36,000 mile standard drain interval And also is approved for use in Mercedes-Benz vehicles requiring a fluid meeting MB 236.41.
Petro-Canada DuraDrive MV Synthetic ATF is suitable for use in a wide range of North American, Asian, and European automatic transmissions.
Petro-Canada ATF Type-F meets the now obsolete Ford ESW-M2C33-F and ESP-M2C33-G specifications and is recommended wherever Ford Type-F fluid is required. It is a non-friction modified automatic transmission fluid designed to allow clutches to engage and lockup quickly, and as such, it is not suitable for modern automatic transmissions.
DuraDrive DCT MV Synthetic is suitable for use in a wide range of European, Asian, and North American wet Dual or double Clutch Transmissions.
DuraDrive CVT MV Synthetic is suitable for use in a wide range of North American, Asian, and European Continuously Variable Transmissions with belt/pulley or chain/pulley arrangements.
Petro-Canada ATF+4® has been tested and approved by FCA US LLC. It is the recommended transmission fluid for top-up and refill of all automatic transmissions in FCA vehicles where ATF+4® or earlier versions of ATF+®, such as ATF+3® standard is recommended.
DuraDrive HD Synthetic Blend ATF is suitable for use in heavy duty fleets for up to 80,000 km (50,00 miles) in severe service and 160,000 km (100,000 miles) in normal service as defined by the OEM Guidelines
DuraDrive HD Long Drain ATF is suitable for use in heavy duty fleets for extended 120,000 km (75,000 miles) and up to 180,000 km (112,000 miles) as defined by the OEM Guidelines.
Petro-Canada ATF D3M is recommended for automatic, power shift and hydrostatic transmissions installed in many older cars and trucks, as well as off-highway vehicles. It also gives excellent performance when used as a hydraulic fluid in mobile equipment.