Petro-Canada™ Lubricants SENTRON stationary gas engine oils (SGEO) are premium performance.
Long life engine oils specially formulated to lubricate stationary gas engines and compressors. SENTRON’s extended drain intervals can mean lower maintenance costs, less used oil to dispose of and a more efficient and profitable operation. SENTRON’s exceptional performance is especially Important in the severe service conditions common in compression, power generation and combined heat and power applications. Its outstanding anti-wear protection helps to Minimize polish and wear of cylinder liners and wear of piston rings, while helping to reduce carbon build-up.
- Longer oil life provides long-lasting equipment protection
- Extended drain interval can reduce maintenance and provide savings
- Outstanding anti-wear/anti-scuff protection
- Keeps engine parts clean
- Extremely low oil volatility
SENTRON ASHLESS 40 (0.05% wt ash) is recommended primarily for 2-stroke cycle gas engines but may be used in certain 4stroke cycle gas engines.
SENTRON LD 8000 (0.52% wt ash) is a premium low ash SAE 40 lubricant, suitable for use in 4–stroke engines operating on natural pipeline gas, pre-treated sewage/bio-gas and selective pre-treated process gases. It provides revolutionary performance of up to 300%* longer drain intervals over the leading global conventional competitor.
SENTRON LD 5000 (0.57% wt ash) provides excellent performance for up to 200%* longer drain intervals and exceptional overall engine protection for maximum reliability and savings.
SENTRON LD 3000 (0.47% wt ash) is recommended for most 4stroke and some 2-stroke gas engines. It is suitable for use in engines fitted with catalytic converters. SENTRON LD 3000 helps provide a high level of performance in high output turbocharged engines that prefer a low ash oil.
SENTRON CG 40 PLUS (0.52% wt ash) is a uniquely designed low ash formula for 4-stroke gas engines running in biogas, sewage gas and landfill gas operations. SENTRON CG 40 PLUS is specifically designed to address current and future engines running in severely contaminated gas applications where higher BMEP engines are used.
SENTRON VTP 10W-40 (0.59% wt ash) is specially formulated to meet the demands of stationary natural gas engines for exceptional cleanliness of the engine through all seasons. SENTRON VTP 10W-40 is suitable for use in applications where Cummins CES 20074-2012 is specified.
SENTRON VTP 0W-30 (0.58% wt ash) is a low ash, synthetic blend SGEO formulated specifically as an all season solution for small to mid-sized engines that are difficult to start in severe winter conditions.
SENTRON LD SYNTHETIC BLEND (0.53% wt ash) is a 15W-40 multigrade extension of the SENTRON line, formulated as a synthetic blend to extend drain intervals and give better low temperature performance in comparison to mono-grade SAE 40’s.
SENTRON VTP 10W-40 PLUS (0.68 wt ash) is specifically designed to aid gasoline converted engines to natural gas engines that need additional anti-wear characteristics due to the valve train, and / or for engines where extreme improved low temperature performance benefits are desired due to cyclic engine on-off cycles.
SENTRON MID ASH 40 (0.80% wt ash) is recommended for use in high performance, 4-stroke cycle gas engines requiring a medium ash content.
SENTRON CG 40 (0.93% wt ash) is designed specifically for 4stroke cycle gas engines running in severe service such as cogeneration, sewage or sour gas or low halogen landfill gas operations.